Ultra-thin iron-on transfers from emmapünktchen® – a must-have! The iron-on transfers are already weeded and easy to iron on. Another plus: no additional transfer film is required!

A beautiful motif on thin PU film for your creativity. Simply iron on, and any garment will be an absolute eye-catcher. Each iron-on transfer is produced to a high quality using a complex eco-solvent process.

Contents:

1 test motif

1 iron-on motif 5.5 x 6.5 cm (recommended for white and light fabrics)

1 step-by-step guide

Processing instructions:

1. Preheat your press or iron to about 155 degrees (if using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and stick the transfer film on
3. Remove the backing film and place the iron-on transfer onto the fabric (press the fabric for 2-3 seconds)
4. Place the textile on a firm surface or in the press and press for about 15 seconds
5. Carefully peel off the transfer film while it is still warm.
6. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry.

Despite its thinness, the film boasts high opacity. The glossy surface ensures brilliant color reproduction. Perfect for both light and dark textiles.

The film is certified according to Oeko-Tex Standard 100, meaning it is safe for children's clothing.

Ultra-thin iron-on transfers from emmapünktchen® – a must-have! The iron-on transfers are already weeded and easy to iron on. Another plus: no additional transfer film is required!

A beautiful motif on thin PU film for your creativity. Simply iron on, and any garment will be an absolute eye-catcher. Each iron-on transfer is produced to a high quality using a complex eco-solvent process.

Contents:

1 test motif

1 iron-on motif 5.5 x 6.5 cm (recommended for white and light fabrics)

1 step-by-step guide

Processing instructions:

1. Preheat your press or iron to about 155 degrees (when using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and stick the transfer film on
3. Remove the backing film and place the iron-on transfer onto the fabric (press the fabric for 2-3 seconds)
4. Place the textile on a firm surface or in the press and press for about 15 seconds
5. Carefully peel off the transfer film while it is still warm.
6. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry.

Despite its thinness, the film boasts high opacity. The glossy surface ensures brilliant color reproduction. Perfect for both light and dark textiles.

The film is certified according to Oeko-Tex Standard 100, meaning it is safe for children's clothing.

Ultra-thin iron-on transfers from emmapünktchen® – a must-have! The iron-on transfers are already weeded and easy to iron on. Another plus: no additional transfer film is required!

A beautiful motif on thin PU film for your creativity. Simply iron on, and any garment will be an absolute eye-catcher. Each iron-on transfer is produced to a high quality using a complex eco-solvent process.

Contents:

1 test motif

1 iron-on motif 5 x 4.5 cm (recommended for white and light fabrics)

1 step-by-step guide

Processing instructions:

1. Preheat your press or iron to about 155 degrees (if using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and stick the transfer film on
3. Remove the backing film and place the iron-on transfer onto the fabric (press the fabric for 2-3 seconds)
4. Place the textile on a firm surface or in the press and press for about 15 seconds
5. Carefully peel off the transfer film while it is still warm.
6. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry.

Despite its thinness, the film boasts high opacity. The glossy surface ensures brilliant color reproduction. Perfect for both light and dark textiles.

The film is certified according to Oeko-Tex Standard 100, meaning it is safe for children's clothing.

Ultra-thin iron-on transfers from emmapünktchen® – a must-have! The iron-on transfers are already weeded and easy to iron on. Another plus: no additional transfer film is required!

A beautiful motif on thin PU film for your creativity. Simply iron on, and any garment will be an absolute eye-catcher. Each iron-on transfer is produced to a high quality using a complex eco-solvent process.

Contents:

1 test motif

1 iron-on motif 4.5 x 6 cm (recommended for white and light fabrics)

1 step-by-step guide

Processing instructions:

1. Preheat your press or iron to about 155 degrees (if using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and stick the transfer film on
3. Remove the backing film and place the iron-on transfer onto the fabric (press the fabric for 2-3 seconds)
4. Place the textile on a firm surface or in the press and press for about 15 seconds
5. Carefully peel off the transfer film while it is still warm.
6. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry.

Despite its thinness, the film boasts high opacity. The glossy surface ensures brilliant color reproduction. Perfect for both light and dark textiles.

The film is certified according to Oeko-Tex Standard 100, meaning it is safe for children's clothing.

emmapünktchen ® - Kisses

The motif has a size of 3 x 1 cm and is mounted on a high-quality wooden block measuring 4 x 2 cm.
The high-quality stamping wood is made in Germany and is made of knotless beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp flowers in a top

The motif measures 2.7 x 4.9 cm and is mounted on a high-quality wooden block measuring 3 x 5 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp bunny

The motif measures 3.9 x 5.7 cm and is mounted on a high-quality wooden block measuring 4 x 6 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

A beautiful hand-drawn motif for your creativity. Simply iron on, and any piece of clothing will be an absolute eye-catcher. Each iron-on transfer is produced using a sophisticated printing process to ensure high quality.

Contents:

DIN A6 incl. test hearts

Processing instructions:

Suitable for 100% cotton or cotton blends with a minimum of 70% cotton.

1. Preheat your press or iron to about 130 - 140 degrees (when using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and place it on the textile
3. Place the textile on a firm surface or in the press and press for about 12-15 seconds
4. Carefully peel off the transfer film while it is still hot.
5. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry the fabric. Do not use bleach!

A beautiful hand-drawn motif for your creativity. Simply iron on, and any piece of clothing will be an absolute eye-catcher. Each iron-on transfer is produced using a sophisticated printing process to ensure high quality.

Contents:

DIN A6 incl. test hearts

Processing instructions:

Suitable for 100% cotton or cotton blends with a minimum of 70% cotton.

1. Preheat your press or iron to about 130 - 140 degrees (when using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and place it on the textile
3. Place the textile on a firm surface or in the press and press for about 12-15 seconds
4. Carefully peel off the transfer film while it is still hot.
5. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry the fabric. Do not use bleach!

A beautiful hand-drawn motif for your creativity. Simply iron on, and any piece of clothing will be an absolute eye-catcher. Each iron-on transfer is produced using a sophisticated printing process to ensure high quality.

Contents:

DIN A6 incl. test hearts

Processing instructions:

Suitable for 100% cotton or cotton blends with a minimum of 70% cotton.

1. Preheat your press or iron to about 130 - 140 degrees (when using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and place it on the textile
3. Place the textile on a firm surface or in the press and press for about 12-15 seconds
4. Carefully peel off the transfer film while it is still hot.
5. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry the fabric. Do not use bleach!

A beautiful hand-drawn motif for your creativity. Simply iron on, and any piece of clothing will be an absolute eye-catcher. Each iron-on transfer is produced using a sophisticated printing process to ensure high quality.

Contents:

DIN A6 incl. test hearts

Processing instructions:

Suitable for 100% cotton or cotton blends with a minimum of 70% cotton.

1. Preheat your press or iron to about 130 - 140 degrees (when using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and place it on the textile
3. Place the textile on a firm surface or in the press and press for about 12-15 seconds
4. Carefully peel off the transfer film while it is still hot.
5. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry the fabric. Do not use bleach!

A beautiful hand-drawn motif for your creativity. Simply iron on, and any piece of clothing will be an absolute eye-catcher. Each iron-on transfer is produced using a sophisticated printing process to ensure high quality.

Contents:

DIN A6 incl. test hearts

Processing instructions:

Suitable for 100% cotton or cotton blends with a minimum of 70% cotton.

1. Preheat your press or iron to about 130 - 140 degrees (when using an iron, please turn off the steam)
2. Roughly cut out the desired iron-on image and place it on the textile
3. Place the textile on a firm surface or in the press and press for about 12-15 seconds
4. Carefully peel off the transfer film while it is still hot.
5. Wash the fabric at least 24 hours after washing at a maximum of 40 degrees Celsius. To significantly extend its durability, do not tumble dry the fabric. Do not use bleach!

emmapünktchen ® - Wooden stamp Mr. Dog Heart Mini

The motif has a size of 2 x 2 cm and is mounted on a high-quality wooden cone.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp A big hug

The motif has a size of 3.6 x 1.2 cm and is mounted on a high-quality wooden block measuring 4 x 2 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp penguin

The motif measures 3.8 x 5.7 cm and is mounted on a high-quality wooden block measuring 4 x 6 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - Wooden stamp flower mini

The motif has a size of 1 x 2.2 cm and is mounted on a high-quality wooden cone.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp flowers

The motif measures 1.7 x 2.7 cm and is mounted on a high-quality wooden block measuring 3 x 2 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp Mr. Dog Flowers

The motif measures 3.7 x 2.9 cm and is mounted on a high-quality wooden block measuring 4 x 4 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - Wooden stamp Mr. Dog Dots

The motif measures 3.7 x 2.9 cm and is mounted on a high-quality wooden block measuring 4 x 4 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp Mr. Dog Fleckchen

The motif measures 3.7 x 2.9 cm and is mounted on a high-quality wooden block measuring 4 x 4 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp Mr. Dog Heart

The motif measures 3.7 x 2.9 cm and is mounted on a high-quality wooden block measuring 4 x 4 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp little guardian angel

The motif measures 5.8 x 1.8 cm and is mounted on a high-quality wooden block measuring 6 x 2 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp bunny stripes jar

The motif measures 3.5 x 5.7 cm and is mounted on a high-quality wooden block measuring 4 x 6 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen

emmapünktchen ® - wooden stamp bunny heart

The motif measures 2.5 x 5.6 cm and is mounted on a high-quality wooden block measuring 3 x 6 cm.
The high-quality stamping wood is made in Germany and is made of knotless, varnished beechwood. For ease of use, the wood features a recessed grip on two sides.
The motif was professionally laser-cut from high-quality rubber stamping material and then laser-cut. This ensures a perfect fit between the rubber stamping material and the foam board that is also attached.

All motifs are hand-drawn by emmapünktchen ® with great attention to detail, digitized and engraved and cut using a high-performance laser.

The motifs may not be traced, copied or altered.

When using the motifs on the Internet, the addition © emmapünktchen is mandatory.

emmapünktchen ® stamps are subject to the ANGEL POLICY, which means that the works may be sold as long as they have been individually created by hand by the buyer. Any graphic, mechanical, or electronic reworking, reproduction (e.g., by photocopying), or mass production is expressly prohibited!

Scope of delivery: 1 stamp

© emmapünktchen